From home appliances to industrial equipment, the demand for integrating Wi-Fi into just about everything has grown dramatically over the last few years. Many designers are using “pre-certified modules” to embed this connectivity quickly and easily – at least, in theory. The reality is there are still many challenges to getting the end-product implementation certified as complying with mandatory, complex regulatory requirements.

This course will look at compliance and certification issues, and how pre-compliance testing can make the path to final approval quicker, less costly, and less frustrating. It will also look at some of the complex, critical tests and masks that OEMs must use and pass, and how the right instrumentation can make this challenging aspect of design and approval go more smoothly. Finally, it shows how combining correlated time- and frequency-domain measurements can help in all aspects of debug, including transient performance, EMI issues, and more.

To help guide you, here are some timestamps:  Introduction (slide 1-6) starts at 0 minutes, Getting Started (slides 7-14) starts at 4:00minutes, Compliance Basics (slides 15-18) starts at 9:00 minutes, Test (slides 19-42) starts at 12:30 minutes, Tektronix Solution (slides 43-52) starts at 29:30 minutes, Wrap-Up and Closing (slides 53-56) starts at 40:30 mins.


Bill Schweber

Bill Schweber is an electronics engineer who has written three textbooks on electronic communications systems, as well as hundreds of technical articles, opinion columns, and product features. In past roles, he worked as a technical web-site manager for multiple topic-specific sites for EE Times, as well as both the Executive Editor and Analog Editor at EDN. At Analog Devices, Inc.