HEW Target Server Design Contest—Design a Windows application using HEW Target Server (HTS). Over $15,000 in cash prizes! Also qualify for free demo kit! Enter now! Click here to enter contest or for more information.
Recent Additions
M16C/62P with FoUSB Virtualab M16C/62P is based on the M16C/60 CPU Core and operates on 3.0V at 24MHz (maximum operating frequency when using PLL Synthesizer). Mask ROM, Flash Memory, and ROM-less versions are all available. Internal Flash memory is programmable on a single power source. It comes with 11 channels of 16-bit Multifunction Timers, 3 channels of UART/Clock Synchronous Serial Interface, 26 channels of 10-bit A/D Converter, 2 channels of 8-bit D/A Converters, 2 channels of DMACs.
Top 10 Design Center How-To stories of 2007
Design Article
From MOSFETs to hybrid car systems--and back to MOSFETs--here's what Automotive DesignLine readers found most interesting during the year, as voted by their page views.
GNU Utilities Course Technology course • 40 minutes This course describes the three types of GNU utilities supported by the KPIT GNU toolchain and then explains what each of the utilities does and how it is used.
GNU Tools Debug with Monitor Course Technology course • 50 minutes This course describes the process of debugging an application on an SH target — a SuperH MCU — in the High-performance Embedded Workshop (HEW) using the KPIT GNU toolchain and the Renesas HMON monitor. The course explains how to create a new project, configure the debug platform using a familiar GUI, configure the Flash Development Toolkit (FDT), and download your application on the target. The course then steps you through the process of debugging a typical application with this setup.
GNU Tools Debug with Emulator Course Technology course • 50 minutes This course describes the process of debugging an application on an SH target — a SuperH MCU — in HEW using the KPIT GNU toolchain and the Renesas E10A-USB emulator. The course explains how to create a new project, make linker settings, configure the debug platform, and connect to the target system. Then it steps through the process of debugging a typical application with this setup.
