datasheets.com EBN.com EDN.com EETimes.com Embedded.com PlanetAnalog.com TechOnline.com  
Events
UBM Tech
UBM Tech
Welcome Guest Log In | Register

A Tutorial on ITU-T G.709 Optical Transport Networks (OTN)

Authored on: Feb 3, 2010 by Steve Gorshe

Technical Paper

0 0
More InfoLess Info

The SONET/SDH network that has grown to be the backbone of most of the modern telecommunications network was originally designed for optical interfaces that used a single wavelength per fiber. As optical component technology has advanced, it has become more economical to transmit multiple SONET/SDH signals over the same fiber using wavelength division multiplexing (WDM) instead of going to a higher rate SONET/SDH signal. Based on experience with the SONET/SDH networks, the ITU-T defined a transport network that was optimized for cost-effective transparent transport of a variety of client signals over WDM networks. The optical transport network (OTN) architecture is specified in ITU-T Rec. G.872 and the frame format and payload mappings are specified in G.709 for carrying SONET/SDH, Ethernet and storage area network (SAN) signals in a much more cost-effective manner than was possible over SONET/SDH networks. This white paper provides a tutorial overview of OTN, with primary emphasis on ITU-T G.709. The white paper also discusses various constraints that influenced the development of G.709, its current status in the network, and some factors that will affect its future.



Please disable any pop-up blockers for proper viewing of this paper.

0 comments
write a comment

Please Login

You will be redirected to the login page

×

Please Login

You will be redirected to the login page

×

Please Login

You will be redirected to the login page